Non-Polluting
RMAK International Limited
16 Djanie Ashie street
East Legon, Accra
Menu
DESCRIPTION
Moist Metal Grip is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. Moist Metal Grip was developed to be applied to metal surfaces that cannot be dry enough to use Rust Grip®. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood.
FEATURES
| Product Chemistry | Epoxy based |
| Volume Solids | 51% |
| VOC Level | 158 g/L, 1.32 lbs./gal. |
| Dry Time (at 70˚F) | 30-60 minutes to tack free |
| Full Cure | Evaporation |
SOLUTIONS
BENEFITS
TYPICAL USES
1. As a one-coating system for metal that is moist or in high humidity.
2. As a one-coating system to encapsulate existing rusted surfaces.
3. As a one-coating system to protect metal with condensation issues.
4. As a one-coating system to line tanks.
5. Very good acid and good alkali resistance
6. As a primer before Enamo Grip or Lining Kote is applied.
APPLICATION METHODS
Moist Metal Grip can be applied to metal, as well as concrete or masonry substrates. The coating can be applied by spray, brush or roller. For specific instructions on surface preparation, mixing and application, please refer to the SPI’s application instructions for Moist Metal Grip.
Rust Grip® is our leading corrosion coating that eliminates 60% of project costs by avoiding the need to grit blast or dispose of hazardous waste (including asbestos).
Super Therm® is our solar heat blocking product that blocks 95% of solar heat load irrespective if the coating is clean or becomes dirty, it physically lacks the density to load and hold heat. Whether it is a building (roof), tanks, piping, containers or portable offices, if Solar Heat is an issue, Super ThermⓇ will stop the heat from loading all together taking a proactive approach to heat load and heat transfer.
Contact our team at Superior Product Coatings Africa to see if you qualify for a demo application of our leading energy saving or corrosion management solutions.
Superior Product Coatings Africa are official distributors of Enamo Grip & SPI Coatings range of international products, in Southern Africa.
RMAK International Limited
16 Djanie Ashie street
East Legon, Accra
+233 544 919695
+233 204 350250