Non-Polluting
RMAK International Limited
16 Djanie Ashie street
East Legon, Accra
DESCRIPTION
Super Therm® is a water-borne combination of high-performance aliphatic urethanes, elastomeric acrylics, amd resin additives which produces a tough, yet flexible coating film. Designed for performance and durability, Super Therm® contains 4 unique ceramics to block up to 95% of Solar Radiational Heat entering a structure due to Visual Light, Ultra Violet (UV), and Infrared (IR). Super Therm® is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof (eliminate thermal shock) and prevent corrosion and surface deterioration.
FEATURES
CHARACTERISTICS
Product Chemistry | Ceramic & water based |
Volume Solids | 60% |
VOC Level | 67.2 g/L, 0.561 gal/lbs |
Dry Time (at 70˚F) | 30-60 minutes to tack free |
Full Cure | 2 hours at 40% rel. humidity |
TYPICAL USES
1. As a one-coat insulation system on exteriors to block the migration of Solar Heat gain. (Roofs and side walls).
2. As an insulation system for interior applications to seal and block some of the IR heat loss.
3. As insulation for transportation vehicles, refrigerated containers, reefer trucks, and railroad cars when applied to the exterior.
4. Exterior application to reduce or eliminate condensation on HVAC systems, tanks, spheres, storage systems, and concrete walls.
5. As a system over metal, concrete, masonry, and wood to stop moisture penetration and corrosion.
6. Ability to resist dirt, mold, mildew, and pollution to increase longevity, and reduce surface maintenance.
7. As a topcoat over metal roofs, or an intermediate coat on flat roofs.
8. Applied over tent fabrics to provide insulation & remain flexible.
APPLICATION METHODS
Super Therm® can be applied to metal, concrete, masonry and wood. The application can be spray, brush or roller. For specific instructions on surface preparation, mixing and application, please refer to the SPI’s application instructions for Super Therm®. This coating should never be applied at less than 17 mils wet (425 microns), 10.1 mils dry (250 microns), each coat.
RESOURCES & DOWNLOADS
The basic principles of Super Therm heat blocking properties are high-performance thermal reflection + low absorptive emissivity + high radiative emissivity + conductive resistance = the incredible thermal solar heat block of Super Therm
Key Features and Benefits of Super Therm®
“Super Therm has been applied to a number of chicken broilers to stop 95% of solar heat load thus providing a far more comfortable and pleasant environment for the baby chickens inside”.
More Solutions:
Rust Grip® is our leading corrosion coating that eliminates 60% of project costs by avoiding the need to grit blast or dispose of hazardous waste (including asbestos).
Enamo Grip is a self-levelling application with a even & smooth finish that forms a uniquely hard and durable coating film. This coating demonstrates unsurpassed semi-gloss and color retention, as well as chalk resistance when used in exterior applications. It is resistant to water and humidity, stains, acids, solvents, and chemicals, as well as having tremendous scuff, mar and impact resistance.
Demo Applications:
Contact our team at Superior Product Coatings Africa to see if you qualify for a demo application of our leading energy saving or corrosion management solutions.
Superior Product Coatings Africa are official distributors of Super Therm & SPI Coatings range of international products, in Southern Africa.
RMAK International Limited
16 Djanie Ashie street
East Legon, Accra
+233 544 919695
+233 204 350250